1. Sealing for coated glass, the materials with polycarbonate, large glass;
2. Sealing for windows and doors;
3. Excellent adhesive to most common building material.
1. One-part; Room temperature; Neutral curing silicone sealant;
2. Non-corrosive to marble, coated glass, concrete, metal (not including copper) etc;
3. Quickly speed of curing, excellent adhesion, excellent displacement capability;
4. Good compatibility with other neutral silicone sealants.
1. Clean with solvents such as toluene or acetone to keep the substrate surfaces completely clean and dry;
2. For better appearance cover outside of joint areas with masking taps before application;
3. Cut nozzle to desired size and extrudes sealant to joint areas;
4. Tool immediately after sealant application and remove masking tape before sealant skins.
1. Unsuitable for curtain wall structural adhesive;
2. Unsuitable for the airproof location, because it is required to absorb moisture in air to cure for the sealant;
3. Unsuitable for the frosty or moist surface;
4. Unsuitable for the continually soggy place;
5. Can’t be used if the temperature is below 4°C or above 50°C on the surface of the material.
Shelf life: 12 months if keep sealing, and stored below 270C in cool, dry place after the date of production.
Volume: 300ml
The following data are only for reference purpose, not intended for use in preparing specification.
OLV 628 Neutral Project Silicone Sealant |
||||
Performance |
Standard |
Measured Value |
Testing Method |
|
Test at 50±5% RH and temperature 23±2℃: |
||||
Density (g/cm3) |
±0.1 |
1.01 |
GB/T 13477 |
|
Tack-Free Time (min) |
≤180 |
5 |
GB/T 13477 |
|
Extrusion g/10S |
/ |
9 |
GB/T 13477 |
|
Tensile Modulus (Mpa)
|
23℃ |
﹥0.4 |
0.6 |
GB/T 13477
|
–20℃ |
or ﹥0.6 |
/ |
||
105℃ weight lost , 24hr % |
/ |
7 |
||
Slumpability (mm) vertical |
not change shape |
not change shape |
GB/T 13477 |
|
Slumpability (mm) horizontal |
≤3 |
0 |
GB/T 13477 |
|
Curing Speed (mm/d) |
2 |
5 |
/ |
|
As Cured -After 21 days at 50±5% RH and temperature 23±2℃: |
||||
Hardness (Shore A) |
20~60 |
25 |
GB/T 531 |
|
Tensile Strength under Standard Conditions (Mpa) |
/ |
0.8 |
GB/T 13477 |
|
Elongation of Rupture (% ) |
/ |
250 |
GB/T 13477 |
|
Movement Capability (%) |
/ |
20 |
GB/T 13477 |