1. Mainly for sealing the gaps or joints interior and exterior, such as doors and window frames, walls, window sills, prefab elements, stairs, skirting, corrugated roof sheets, chimneys, conduit-pipes and roof gutters;
2. Can be used on most construction materials, such as brick, concrete, plasterwork, asbestos cement, wood, glass, ceramic tiles, metals, aluminum, zinc and so on;
3. Acrylic sealant for windows and doors.
1.One part, water based acrylic sealant that cures to a flexible and tough rubber with good adhesion to porous surface without primer;
2.Suitable for sealing and filling gaps or joints where low demands of elongation are required.
1. Unsuitable for permanently flexible sealing, for cars or spaces where wet conditions exist, e.g. aquaria, foundations and swimming pools;
2. Do not apply at temperature below 0℃;
3. Be not fit for continuous immersion in water;
4. Keep out of reach of children.
Tips:
The joint surfaces must be clean and free from dust, rust and grease. Tar and bitumen substrates reduce the bonding ability;
In order to improve the bonding ability to strongly absorbing porous surfaces, such as stone, concrete, asbestos cement and plasterwork, these surfaces should first be primed with a diluted sealant (1 volume of Acrylic Sealant to 3-5 volumes of water) until the primer to dry completely.
Shelf life: Acrylic Sealant is sensitive to frost and must be kept in tightly closed packing in a frost-proof place. The shelf life is about 12 months when stored in a cool and dry place.
Standard: JC/T 484-2006
Volume: 300ml
Technical data:
The following data are only for reference purpose, not intended for use in preparing specification.
OLV 77 Caulk & Seal Sealant |
|||
Performance |
Standard |
Measured Value |
Testing Method |
Appearance |
Have no grain no agglomerations |
good |
GB/T13477 |
Density (g/cm3) |
/ |
1.6 |
GB/T13477 |
Extrusion ml/min |
﹥100 |
110 |
GB/T13477 |
Skin-Free Time (min) |
/ |
10 |
GB/T13477 |
Elastic recovery rate (%) |
﹤40 |
18 |
GB/T13477 |
Fluidity Resistance (mm) |
≤3 |
0 |
GB/T13477 |
Elongation of Rupture (%) |
﹥100 |
190 |
GB/T13477 |
Elongation and Adhesion (Mpa) |
0.02~0.15 |
0.15 |
GB/T13477 |
Stability of Low Temperature storage |
No caky and isolating |
/ |
GB/T13477 |
Water resistance at the beginning |
No feculent |
No feculent |
GB/T13477 |
Pollution |
No |
No |
GB/T13477 |
Storage |
12 Months |