1.Designed for sealing non-structural curtain wall joints;
2.For marble, granite, concrete, ceramic, most plastics, tile & brickworks;
3.Other general exterior wall gap-filling waterproof purpose.
1.One-component, neutral cured, excellent performance in sealing;
2.Excellent weatherability, anti-UV, anti-ozone and waterproofing;
3.On curing will form a strong bond to most common building components without the use of primer.
1. Clean with solvents such as toluene or acetone to keep the substrate surfaces completely clean and dry;
2. For better appearance cover outside of joint areas with masking taps before application;
3. Cut nozzle to desired size and extrudes sealant to joint areas;
4. Tool immediately after sealant application and remove masking tape before sealant skins.
1. Unsuitable for curtain wall structural adhesive;
2. Unsuitable for the airproof location, because it is required to absorb moisture in air to cure for the sealant;
3. Unsuitable for the frosty or moist surface;
4. Unsuitable for the continually soggy place;
5. Can’t be used if the temperature is below 4°C or above 50°C on the surface of the material.
Shelf life: 12 months if keep sealing, and stored below 270C in cool, dry place after the date of production.
Volume: 300ml
Technical data:
The following data are only for reference purpose, not intended for use in preparing specification.
OLV 228 Neutral Anti mildew Silicone Sealant |
||||
Performance |
Standard |
Measured Value |
Testing Method |
|
Test at 50±5% RH and temperature 23±20C: |
||||
Density (g/cm3) |
±0.1 |
0.98 |
GB/T 13477 |
|
Skin-Free Time (min) |
≤30 |
5 |
GB/T 13477 |
|
Extrusion(ml/min) |
≥80 |
260 |
GB/T 13477 |
|
Tensile Modulus (Mpa)
|
230C |
﹥0.4 |
0.45 |
GB/T 13477
|
–200C |
or ﹥0.6 |
/ |
||
Slumpability (mm) vertical |
≤3 |
0 |
GB/T 13477 |
|
Slumpability (mm) horizontal |
not change shape |
not change shape |
GB/T 13477 |
|
Curing Speed (mm/d) |
2 |
3.5 |
/ |
|
As Cured -After 21 days at 50±5% RH and temperature 23±20C: |
||||
Hardness (Shore A) |
20~60 |
32 |
GB/T 531 |
|
Tensile Strength under Standard Conditions (Mpa) |
/ |
0.45 |
GB/T 13477 |
|
Elongation of Rupture (% ) |
/ |
200 |
GB/T 13477 |
|
Movement Capability (%) |
12.5 |
20 |
GB/T 13477 |
|
Storage |
12 Months |