OLV66 Liquid Nails Adhesive

Short Description:

General Purpose Liquid Nails OLV66 has strong adhesion and can replace nails to the greatest extent. It is most suitable for firmly bonding all kinds of (building materials). No drilling, screws or nails are required. Time saving, efficient and fast.

Add: NO.1, AREA A, LONGFU INDUSTRY PARK, LONGFU DA DAO, LONGFU TOWN,SIHUI,GUANGDONG, CHINA

Tel: 0086-20-38850236

Fax: 0086-20-38850478

Send email to us CHAT NOW

Product Detail

Product Tags

Description

provides professional strength on most common building materials.
Use for:
-Bonds building materials such as metal, aluminium, wood, concrete, mirror.
-Installation timber flooring.
-Bonds decorative paneling.
-Bonds wallboard or paneling to wood or metal frames.
-Installation of mirrors.

Features

1.Can be applied to wet or frozen timber;
2.Will not slump off vertical surfaces. Bridges reasonable gaps and will adhere materials with uneven surfaces.
3.Remains easily extrudable at low winter temperatures;
4.Sufficient flexibility to allow some board shrinkage or movement;
5.Paintable.

Application

1. Bond the door frame, door and window cover, stairs, etc. in the house decoration. Bonding wood to other materials such as aluminum and stainless steel.
2. Bonding flooring, insulation, wood, melamine, wood, plaster, and metal trim in house decoration.
3. Bonding ceramic tiles, cultural stone, marble, marble, aluminum edge and other stone window sills, cabinet counters, etc.
4. Bonding mirrors, glass, ceramics, long-term load-bearing hooks, etc.
5. Bonding hangings, etc. of various materials inside and outside the room.

Properties

Color: White, Beige, and other colors.

How to use

1. Non-nail glue construction material selection: It is most suitable for bonding the following materials in concrete, all kinds of stone, wall plaster, wood and plywood surface: wood, plastic, metal, threshold, signage, slat, door base, window sill , junction box, sheet material, gypsum board, embellished stone, ceramic tile, etc., not suitable for foam materials.
2. Clean the construction surface to ensure no oil and dirt, and remove all loose components;
3. Cut the nail-free hose mouth, puncture the nozzle protective film, put on the rubber nozzle, and squeeze it with a sealing gun;
4. Adhere a few rows of glue-free glue on a single side with a drop of glue or a zigzag pattern (each line is approximately 30 cm apart). Always apply adhesive to the edges of all corners of the sheet and it will be needed within 5 minutes. The bonded parts are placed in place, pressed and tapped with a rubber mallet. If the material is large, heavy, and if necessary, clamp or support (about 24 hours). The ideal effect is achieved after 3 days of bonding.

Tehcnical Data Sheet(TDS)