Model Number: OLV502
Appearance: Clear viscous liquid
Main Raw Material: cyanoacrylate | Ethyl-cyanoacrylate
Specific gravity (g/cm3): 1.053-1.06
Curing time, s (≤10): < 5 (Steel)
Flash point (°C): 80 (176°F)
Work temperature (℃): -50- 80
Tensile shear strength, MPa (≥18): 25.5
Viscosity (25℃), MPa.s (40-60): 51
Temperature ℃: 22
Humidity (RH)%: 62
Shelf life: 12 months
Usage: Construction, general purposes, can be used to rubber, plastic, metal, paper, electronic, component, fiber, garment, leather, Packing, footwear, ceramic, glass, wood, and much more
CAS No.: 7085-85-0
MF: CH2=C-COOC2H5
EINECS No.: 230-391-5
HS: 3506100090
1. Ensuring surface is closely fitting, clean, dry and free from grease (oil), mold or dust, etc.
2. Sightly dampen porous surfaces such as china or wood.
3. Pointing the bottles away from your body, unscrew the cap and nozzle assembly, then pierce the membrane with the top of the cap. Screw the cap and nozzle tightly back onto the tube. Unscrew the cap and the glue is ready for use.
4. Using one drop of super glue per square inch and apply to one surface. Note: Too much glue will deter the bonding or no bonding at all.
5. Pressing (15-30 seconds) the surfaces to bond together firmly and hold until fully bonded.
6. Avoiding spillage, as super glue is difficult to be removed (It’s strong adhesive).
7. Clean excess glue from the tube to ensure the opening is not obstructed. Always screw back the cap immediately after using, put the tube back to the blister packing, keep it in cool and dry storage places and retain it for future use.
Please noted: not suitable for bonding glassware, polypropylene or polythene or rayon.
1. Keep Out Of Reach Of Children & Pets, Danger.
2. Contains Cyanoacrylate, It Bonds Skin And Eyes In Secondes.
3. Irritating To Eyes, Skin And Respiratory System.
4. Do Not Breathe Fumes/vapour. Using Only In Well-ventilated Area.
5. Store Bottles Upright In A Cool Dry Place, Dispose Used Packing Safely.
1. Avoid contacting with skin and eyes. Any contact with eyes or eyelids, rinse immediately with plenty of flowing water and seek medical advice.
2. Wearing suitable gloves. If skin bonding occurs, soaking skin in acetone or warm soapy water and gently peel apart.
3. Do not soak eyelids in acetone.
4. Do not force apart.
5. If swallowed, do not induce vomiting and call a poison control center or physician immediately.